To take off bike pedals, use a pedal wrench to loosen the pedal by turning it counterclockwise. Then, unscrew and remove the pedal from the crank arm.

Packed with adrenaline and a sense of freedom, cycling is an exhilarating experience enjoyed by millions around the world. However, there are times when we need to remove our bike pedals for various reasons. Whether you’re upgrading to new pedals or performing maintenance, knowing how to take off bike pedals is an essential skill for any cyclist.

We will guide you through the process of removing your bike pedals with ease. So, let’s delve into the steps required to get those pedals off and get you back on the saddle in no time.

How to Effortlessly Remove Bike Pedals


Essential Tools For Bike Pedal Removal

If you’re a bike enthusiast or just someone who enjoys the occasional ride, it’s important to know how to take off bike pedals. Whether you’re a beginner or an experienced cyclist, removing bike pedals might seem like a daunting task. However, with the right tools, it can be a breeze. In this section, we will discuss the essential tools you need to successfully remove your bike pedals, ensuring a smooth and hassle-free process.

<Allen wrench set>

An Allen wrench set is an indispensable tool when it comes to bike maintenance. It consists of a set of hexagonal wrenches in various sizes, allowing you to tackle a range of repair tasks on your bike, including pedal removal. The most common size needed for removing bike pedals is 6mm. Allen wrenches are compact, lightweight, and easy to use, making them an essential addition to any cyclist’s tool kit.

<Adjustable wrench>

An adjustable wrench is another versatile tool that comes in handy during pedal removal. This wrench has a sliding jaw that can be adjusted to fit different sizes of nuts and bolts. When removing bike pedals, an adjustable wrench can be used to hold the crank arm while turning the pedals’ axle with an Allen wrench. It provides a firm grip and ensures that you can apply enough torque to loosen the pedals.

<Pedal wrench>

A pedal wrench is specifically designed for removing bike pedals. It has a long handle and a thin, open-ended wrench on both sides, each with different sizes to fit different pedal axles. Using a pedal wrench ensures a non-slip grip and provides leverage to help you exert more force during the removal process. While an Allen wrench or adjustable wrench can also get the job done, a pedal wrench is the preferred tool of choice for professional mechanics and serious cyclists.

Now that you know the essential tools for bike pedal removal – the Allen wrench set, adjustable wrench, and pedal wrench – you’re well-equipped to tackle this task with confidence. Whether you need to swap pedals, perform maintenance, or pack your bike for transportation, having these tools at your disposal will make the process much easier. So go ahead, grab your tools, and get ready to take off those bike pedals!

Optional Tools And Accessories

When it comes to taking off bike pedals, having the right tools and accessories can make the process much easier and efficient. While some cyclists prefer to use their hands and manual force, using optional tools and accessories can save you time and effort. Here are a few essential items that you might consider:


Before attempting to remove your bike pedals, it’s always a good idea to apply some grease to the threads. This will not only make the process smoother but also prevent any rust or corrosion from forming. Applying grease also ensures that the pedals are easy to remove in the future. You can use any high-quality bike grease or anti-seize compound for this purpose.


Having a sturdy pair of pliers can be a great asset when it comes to removing bike pedals. Pliers provide a firm grip on the spindle, allowing you to exert more force and leverage. They can be particularly useful if the pedals are stuck or tightly screwed on. Look for pliers that have a good grip and are comfortable to handle. Remember to use a cloth or rag to protect the pedal’s surface from scratches.

Vise Grip

If you’re dealing with extremely stubborn or seized pedals, a vise grip can be a game-changer. A vise grip is a locking plier that clamps down securely onto the pedal spindle, providing a strong grip and additional leverage. This tool is especially useful when traditional methods fail to loosen the pedals. Make sure to choose a vise grip that matches the size of the pedal spindle and use it carefully to avoid damaging any other bicycle components.

Overall, while these tools and accessories are not necessary for removing bike pedals, they can greatly assist in making the process smoother and hassle-free. So, consider having these optional tools in your bike repair kit, as they can save you time and frustration when it comes to removing stubborn or tightly screwed pedals.

Preparing Your Bike For Pedal Removal

Positioning the Bike

Before you start taking off bike pedals, it is important to position your bike properly. This will ensure that the process goes smoothly and you have enough space to work with. Follow these steps to position your bike correctly:

Step 1: Choose a suitable work area

  • Find a flat and open space where you can comfortably work on your bike.
  • Make sure there is enough room around the bike to maneuver without any obstructions.

Step 2: Position the bike upright

  • Place the bike in an upright position, either by leaning it against a wall or using a bike stand.
  • Ensure the bike is stable and won’t tip over while you’re removing the pedals.

Step 3: Set the appropriate gear

  • Shift the gears to the smallest chainring and rear cog. This will help prevent any accidental chain interference during the pedal removal process.
  • Ensure the bike is not in a high gear that requires excessive force to pedal.

Safety Precautions

When removing bike pedals, it’s crucial to prioritize your safety and take necessary precautions. Here are some safety measures to follow:

Step 1: Wear protective gear

  • Put on a pair of sturdy gloves to protect your hands from any potential injuries.
  • Consider wearing safety glasses to shield your eyes from debris or accidental impacts.

Step 2: Apply lubricant (if needed)

  • If the pedals are stuck or rusty, apply some lubricating oil to loosen them up.
  • Give the lubricant some time to penetrate and work its magic before attempting to remove the pedals.

Step 3: Secure the bike

  • Double-check that your bike is firmly positioned to avoid any unexpected movements during pedal removal.
  • Avoid leaving any loose or dangling cables that could cause accidents.

By positioning your bike correctly and taking safety precautions, you can ensure a smooth pedal removal process without any unnecessary complications. So, let’s move on to the next step in the process: removing the bike pedals.

Removing Pedals With An Allen Wrench

Removing Pedals with an Allen Wrench

If you are in need of taking off the pedals from your bike, using an Allen wrench is a convenient and effective method. The Allen wrench, also known as a hex wrench, is a handy tool that can be easily found in most bike maintenance kits. Whether you are replacing your pedals or performing routine maintenance, removing the pedals with an Allen wrench is a straightforward process. In this guide, we will walk you through the step-by-step process of removing pedals with an Allen wrench, so you can get your bike ready for your next adventure.

Locating the Pedal Axle

Before you begin removing the pedals, you need to locate the pedal axle. The pedal axle is the part of the pedal that attaches to the crank arm. It will have a hexagonal shape, which matches the size of the Allen wrench. To find the pedal axle, look for the threaded end of the pedal that extends out from the crank arm. This is where the Allen wrench will connect to loosen the pedal.

Positioning the Wrench

Once you have located the pedal axle, you will need to position your Allen wrench correctly. Insert the short end of the Allen wrench into the hexagonal opening on the pedal axle. Make sure the wrench is securely in place, ensuring a firm grip on the pedal. Position the wrench in such a way that it is perpendicular to the ground or parallel to the crank arm. This will give you the necessary leverage to loosen the pedal.

Applying Force

With the wrench in position, it’s time to apply force to loosen the pedal. Using your body weight, push down on the Allen wrench, or if you prefer, you can use your foot to push down on the wrench. Apply steady pressure in a clockwise motion to unscrew the pedal. It may require a bit of force initially, especially if the pedal has been tightly secured. Once you feel the pedal start to loosen, continue turning until it can easily be removed by hand. Repeat the process for the other pedal.

In Conclusion

Removing pedals with an Allen wrench is a simple process that can be done with just a few tools. By following these steps and using the correct technique, you can easily remove your bike pedals and get your bike ready for any maintenance or upgrades. Make sure to securely store the pedals and keep them in a safe place until you are ready to reinstall them. Now that you know how to remove pedals with an Allen wrench, you can confidently tackle any pedal-related tasks that come your way!

Removing Pedals With A Pedal Wrench

When it comes to removing bike pedals, using a pedal wrench is the most effective tool to get the job done. Whether you need to replace worn-out pedals or want to upgrade to a different style, a pedal wrench is your best bet. In this section, we will guide you through the process of removing bike pedals with a pedal wrench, ensuring a smooth and hassle-free experience.

Orientating the pedal wrench

To start removing your bike pedals using a pedal wrench, it is crucial to orientate the tool correctly. Look for the flats on the pedal spindle, which are the flat surfaces where the wrench will grip. Position the pedal wrench so that it aligns with the flats, ensuring a secure connection that minimizes the risk of slipping or damaging the pedal or the crankarm.

Applying the right amount of force

Once you have the pedal wrench properly aligned, it’s time to apply the right amount of force to loosen the pedals. Tightly secured pedals may require a bit of extra power, so make sure to use your body weight by standing on the wrench handle. This added force, combined with a steady and controlled motion, will help break any tightness and allow the pedal to spin freely. Remember to always turn the wrench in the opposite direction of how you would when pedaling—the left pedal is loosened by turning it clockwise, while the right pedal is loosened by turning it counterclockwise.

Tips for stubborn pedals

If you encounter stubborn pedals that refuse to budge, don’t panic. Here are a few tips to help you tackle even the most unyielding pedals:

  1. Apply some penetrating oil or a lubricant to the pedal threads and allow it to sit for a few minutes. This can help loosen the rust and make it easier to remove the pedals.
  2. Use a longer wrench or attach a lengthening tool to your pedal wrench for increased leverage. This will provide more torque and make it easier to break the pedal free.
  3. If all else fails, you can try heating the pedal area with a hairdryer or a heat gun. The expansion caused by heat may help break the bond between the pedal and the crankarm.

By following these steps and using the right technique with your pedal wrench, you can easily remove bike pedals and take the next step in maintaining or upgrading your ride.

Removing Pedals With An Adjustable Wrench

Taking off bike pedals might seem like a daunting task, but with the right knowledge and tools, it can become a simple and straightforward process. One common tool that can be used for pedal removal is an adjustable wrench. This versatile tool can easily adapt to different sizes, allowing you to remove the pedals efficiently.

Finding the right size wrench

The first step in removing pedals with an adjustable wrench is to find the right size wrench for the job. Since bike pedal sizes can vary, it’s important to select an adjustable wrench that can accommodate the specific size of your pedals.

To determine the correct wrench size, you can either measure the flats of the pedal spindle or consult the manufacturer’s specifications. Once you have the correct size, adjust the wrench to fit the flats tightly to ensure a secure grip during the removal process.

Techniques for effective removal

After finding the right size wrench, you can proceed with removing the bike pedals using the following techniques:

  1. Position the crank arm: Begin by positioning the crank arm in a way that allows you to exert force in a downward motion. This can be done by placing the pedal at the 3 o’clock position for the right side, and the 9 o’clock position for the left side. This will provide better leverage and make the removal process easier.
  2. Hold the crank arm steady: Use your free hand to hold the crank arm firmly, ensuring it remains stable throughout the process. This will prevent any unnecessary movement that could make the removal more challenging.
  3. Apply force in the correct direction: With your adjustable wrench securely attached to the flats of the pedal spindle, apply force in the opposite direction of the bike’s forward motion. For example, to remove the right pedal, turn the wrench clockwise, while to remove the left pedal, turn the wrench counterclockwise.
  4. Utilize additional leverage: If the pedal proves stubborn to remove, you can utilize additional leverage by extending the handle of the wrench or using a pipe as an extension. This will give you more power to break the pedal free.

By following these steps and techniques, you can effectively remove bike pedals using an adjustable wrench. Remember to double-check the tightness of the pedals before riding to ensure safety and prevent any unexpected accidents on the road.

Pedals That Won’T Budge

Have you ever tried taking off your bike pedals, only to find that they just won’t budge? It can be frustrating and leave you feeling stuck. But fear not! In this guide, we will explore the causes of stubborn pedals and provide you with practical solutions to get those pedals off in no time.

Causes of stubborn pedals

There can be several reasons why your bike pedals refuse to come off easily. Understanding these causes can help you determine the appropriate solution. Some common causes include:

  1. Over-tightening: When pedals are tightened excessively, it can make them difficult to remove. This can happen if you used excessive force when installing the pedals or if they have been on the bike for a long time and have become stuck over time.
  2. Corrosion and rust: Exposure to moisture and other elements can cause corrosion and rust to accumulate on the pedal threads. This can result in a tight grip and make it challenging to unscrew the pedals.
  3. Thread direction: It’s important to remember that the pedal on the right side of the bike has a normal right-hand thread, while the pedal on the left side has a left-hand thread. Many people forget this and end up applying force in the wrong direction, leading to stubborn pedals.

Solutions for stuck pedals

Now that we’ve identified the possible causes, let’s explore some effective solutions to help you remove those stubborn pedals:

  1. Apply penetrating oil: If your pedals are stuck due to rust or corrosion, applying a penetrating oil, such as WD-40, can help loosen the threads. Apply the oil to the pedal spindle and let it sit for a few minutes before attempting to remove the pedal again.
  2. Heat it up: Stubborn pedals can also benefit from gentle heat. Use a hairdryer or heat gun to warm up the pedal area before trying to loosen it. The heat will help expand the metal, making it easier to turn.
  3. Use a longer lever: Sometimes, the problem lies in not having enough leverage to turn the pedals. Using a longer wrench or attaching a pipe to the end of your wrench can provide more leverage, making it easier to break the pedal free.
  4. Clean and lubricate: If the pedals are not too tight but still won’t come off, cleaning and lubricating the threads can do the trick. Remove any dirt or debris from the pedal and spindle threads and apply a small amount of bike-specific grease before trying to unscrew the pedal again.

With these solutions, you should be able to get those stubborn pedals off your bike without too much hassle. Remember to exercise caution and apply the appropriate force to avoid damaging the pedals or your bike. Keep in mind the direction of the threads and enlist the help of a professional if you’re unsure or encounter any difficulties.

Damaged Pedal Threads

When it comes to maintaining your bike, one of the common issues you may face is damaged pedal threads. Damaged pedal threads can significantly affect your cycling experience, causing instability and potential accidents. Therefore, it’s essential to recognize the signs of damaged threads and know how to repair or replace them to keep your rides smooth and safe.

Signs of damaged threads

If you suspect that your bike pedals have damaged threads, there are a few signs that can help you confirm your suspicions:

  • Loose pedals: If your pedals feel loose and wobbly when you ride, it may indicate damaged threads.
  • Difficulty in screwing/unscrewing pedals: If you’re struggling to attach or detach your pedals, it could be due to damaged threads.
  • Rust or visible wear: Inspect your pedal threads for rust or visible signs of wear, such as stripped metal or stripped paint. These can indicate damaged threads.
  • Noise or clicking sound: Damaged threads can cause your pedals to make unusual noises while pedaling, such as clicking or creaking sounds.

Repairing or replacing damaged pedals

Once you have confirmed that your bike pedals have damaged threads, you have two options: repairing or replacing them. The choice depends on the extent of the damage and your mechanical skills.

Repairing damaged threads

If the damage to your pedal threads is minimal, you may be able to repair them using a thread tool or pedal thread repair kit. These tools are designed to reestablish proper threading by removing any debris or irregularities.

Here are the general steps for repairing damaged threads:

  1. Remove the pedals: Use a pedal wrench to unscrew the damaged pedals from your bike.
  2. Clean the threads: Use a degreaser and a brush to clean the threads of any dirt, rust, or debris.
  3. Use the thread tool: Apply the thread tool or repair kit according to the manufacturer’s instructions. Follow the specific steps to repair the damaged threads.
  4. Reattach the pedals: Use the pedal wrench to securely reattach the repaired pedals to your bike.

Replacing damaged pedals

If the damage to your pedal threads is severe or you’re unsure about repairing them yourself, it’s best to replace the pedals entirely. Replacing pedals is a straightforward process and requires minimal tools.

Here’s how you can replace damaged pedals:

  1. Remove the pedals: Use a pedal wrench to unscrew the damaged pedals from your bike.
  2. Select new pedals: Choose pedals that are compatible with your bike’s crankset and personal preferences.
  3. Install the new pedals: Apply a small amount of grease to the pedal threads and firmly screw them into the crankset by hand. Then, use the pedal wrench to tighten them securely.

Remember, if you’re not confident in repairing or replacing your bike pedals yourself, it’s always advisable to seek assistance from a professional bike mechanic.

Frequently Asked Questions Of How To Take Off Bike Pedals

Which Way Do Pedals Unscrew?

Pedals unscrew counterclockwise. Unscrew pedals by turning them in the opposite direction of regular tightening rotation.

How Do You Remove Bike Pedals Without Tools?

To remove bike pedals without tools, first, position the pedal at the 3 o’clock or 9 o’clock position. Then, use your foot to push down firmly or pull up quickly while holding onto the bike frame. This should loosen the pedal, making it easier to unscrew by hand.

How Do You Remove Pedals With Allen Key?

To remove pedals with an Allen key, follow these steps: 1. Turn the bike upside down to access the pedals. 2. Locate the pedal axle and insert the Allen key into the socket. 3. Rotate the key counterclockwise to loosen the pedal.

4. Once loose, unscrew the pedal completely. 5. Repeat for the other pedal.


Taking off bike pedals is a simple task with the right tools and techniques. By following the steps outlined in this blog post, you can easily remove your bike pedals without any hassle. Remember to use the appropriate tools, apply pressure in the right direction, and secure the pedals tightly once you’re done.

With this knowledge, you’ll be able to easily remove your bike pedals whenever necessary. Happy riding!